Injin dinki na Aljihu madaidaiciya TS-895
1. Babban inganci: misali maza sun dace da aljihun rufin ciki: 2800pcs / 8 hours
2. Multi-aikin atomatik, Fasahar sarrafa kayan lantarki, Amsa da buƙatun ɗinki iri-iri
3 Tsawon dinki, saurin dinki da saurin canja wuri ana iya tsara su daban-daban
4. Ana iya tsara kowane suturar aljihu tare da ɗigon baya na gaskiya ko dunƙule dunƙule
5. "Upper cutter for direct-drive motor", wanda ke canja wurin wutar lantarki zuwa na'ura ba tare da asarar makamashi ba, ba wai kawai yana ba da fa'idodin tattalin arziki ba saboda raguwar wutar lantarki, amma kuma yana rage girgizar na'ura da hayaniya mai aiki, don haka yana taimakawa wajen ragewa. gajiyawar ma'aikaci.
TheInjin walƙiya aljihu ta atomatik don madaidaiciyar aljihu tare da kadayana goyan bayan ɗinkin madaidaiciyar aljihu (tare da murfi) akan kwat da wando.Za'a iya canza dinki-biyu-/rai-ɗaya ta hanyar taɓa maɓalli mai sauƙi akan rukunin aiki.An kara tsayin dinki (35mm- -220mm).
| Samfura | Farashin TS-895 |
| Gudun dinki | Max.3000rpm |
| Irin welts | Daidaitacce welt sau biyu, layi daya welt (tare da kada, ba tare da harsashi ba) |
| Tsawon dinki | Daidaitaccen 2.5mm (2.0mm ~ 3.4mm) |
| Tsawon dinki (na ɗaure ɗinki) | Ƙunƙarar Ƙarfafawa: Daidaitaccen 1.0mm (0.5- 1.5mm) |
| Back -Tack saiti: Standard 2.0mm (0.5 ~ 3.0mm) | |
| Ana iya canzawa tsakanin ƙwanƙwasa da ɗinki na baya | |
| Hanyar daidaita wuka - kusurwa | Daidaita injina |
| Ma'aunin allura | Standard 10mm 12mm |
| Girman tattarawa | 1.46m*1.05m*1.38m (2.1CBM) |
| Nauyi | GW: 340KGS NW: 260KGS |
